Acura 2012 ZDX Owner'S Manual Download Page 328

Page: 328 / 370

326

Handling the Unexpe

cte
d

Engine Does Not Start

Checking the Engine

If the engine does not start, turn the ignition switch to START

and check the

starter.

*1: Models with the keyless access system have an

ENGINE START/STOP

button

instead of an ignition switch.

Starter condition

Checklist

Starter doesn’t turn or turns
over slowly.

The battery may be dead. Check
each of the items on the right and
respond accordingly.

Check brightness of the interior light.

Turn on interior lights and check brightness.

●

If the interior lights are dim or do not come on at all

Checking the Battery

P. 309

●

If the interior lights come on normally

Fuses

P. 338

The starter turns over normally
but the engine doesn’t start.

There may be a problem with the
fuse. Check each of the items on
the right and respond accordingly.

Review the engine start procedure.

Follow its instructions, and try to start the engine again.

Starting the Engine

P. 223

Check the immobilizer system indicator.

When the immobilizer system indicator is blinking, the engine cannot be started.

Immobilizer System

P. 120

Check the fuel level.

There should be enough fuel in the tank.

Fuel Gauge

P. 87

Check the fuse.

Check all fuses, or have the vehicle checked by a dealer.

Inspecting and Changing Fuses

P. 343

If the problem continues:

Emergency Towing

P. 344

Checking the Engine

If you must start the vehicle immediately, use an
assisting vehicle to jump start it.

Jump Starting

P. 329

Summary of Contents for 2012 ZDX



















































































































































































































































































































































































Search results

Summary of Contents for 2012 ZDX

Reviews:

Related manuals for 2012 ZDX

Brands by name

Popular brands

Acura 2012 ZDX, Owner'S Manual

Search results

Summary of Contents for 2012 ZDX

Reviews:

Related manuals for 2012 ZDX

Brands by name

Popular brands