Acura 2012 ZDX Owner'S Manual Download Page 301

Page: 301 / 370

299

Checking and Maintaining Wiper Blades

Changing the Wiper Blade Rubber

inte
na
n

Slide the wiper blade out from its holder by
pulling the tabbed end out.

Remove the retainers from the rubber blade
that has been removed, and mount to a
new rubber blade.

Correctly align the rubber protrusion and
the retainer grooves.

Slide the new wiper blade onto the holder
from the bottom end.

The tab on the holder should fit in the
indent of the wiper blade.

Slide the wiper blade onto the wiper arm,
then push down the lock tab.

Lower the passenger side wiper arm first,
then the driver side.

Blade

Retainer

Blade

Tab

Indent

Summary of Contents for 2012 ZDX



















































































































































































































































































































































































Search results

Summary of Contents for 2012 ZDX

Reviews:

Related manuals for 2012 ZDX

Brands by name

Popular brands

Acura 2012 ZDX, Owner'S Manual

Search results

Summary of Contents for 2012 ZDX

Reviews:

Related manuals for 2012 ZDX

Brands by name

Popular brands