uu
Braking
u
CMBS
TM
(Collision Mitigation Braking System
TM
)
*
260
Dr
ivi
ng
The CMBS
TM
may activate even when you are aware of a vehicle ahead of you, or
when there is no vehicle ahead. Some examples of this are:
■
When Passing
Your vehicle approaches another vehicle ahead of you and you change lanes to pass.
■
At an intersection
Your vehicle approaches or passes another vehicle that is making a left or right turn.
■
Through a low bridge at high speed
You drive under a low or narrow bridge at high speed.
■
Speed bumps, road work sites, train tracks, roadside objects, etc.
You drive over speed bumps, steel road plates, etc., or your vehicle approaches train
tracks or roadside objects [such as a traffic sign and guard rail] on a curve.
■
With Little Chance of a Collision
1
CMBS
TM
(Collision Mitigation Braking System
TM
)
*
Avoid the following conditions that may cause the
radar aim to be temporarily out of range and prevent
the CMBS
TM
from working properly.
•
A heavy load in the rear or modifications to the
suspension tilts your vehicle.
•
The tire pressures are not correct, the tire sizes are
incorrect, the tire types are different, and/or the
tires are not in good condition.
For a proper CMBS
TM
use:
Always keep the radar sensor cover clean.
Never use chemical solvents or polishing powder for
cleaning the sensor cover. Clean it with water or a
mild detergent.
Do not put a sticker on the emblem or replace the
emblem.
Take your vehicle to a dealer if you need the radar
sensor to be repaired, or removed, or the radar
sensor cover is strongly impacted.
* Not available on all models
