Acura 2012 ZDX Owner'S Manual Download Page 333

Page: 333 / 370

331

Handling the Unexpe

cte
d

Shift Lever Does Not Move

Follow the procedure below if you cannot move the shift lever out of the

position.

Set the parking brake.

Remove the key from the ignition switch.

Remove the built-in key from the keyless
access remote.

Wrap a cloth around the tip of a small flat-
tip screwdriver and remove the cover of the
shift lock release slot.

Put the tip of the flat-tip screwdriver into
the slot and remove it as shown in the
image.

Insert the key into the shift lock release slot.

While pushing on the key, press the shift
lever release button and place the shift lever
into

The lock is now released. Have the shift
lever checked by a dealer as soon as
possible.

■

Releasing the Lock

Slot

Cover

Models without keyless access remote

Models with keyless access remote

All models

Release
Button

Shift Lock
Release Slot

Summary of Contents for 2012 ZDX



















































































































































































































































































































































































Search results

Summary of Contents for 2012 ZDX

Reviews:

Related manuals for 2012 ZDX

Brands by name

Popular brands

Acura 2012 ZDX, Owner'S Manual

Search results

Summary of Contents for 2012 ZDX

Reviews:

Related manuals for 2012 ZDX

Brands by name

Popular brands