Acura 2012 ZDX Owner'S Manual Download Page 61

Page: 61 / 370

Continued

Child Safety

Safety of Infants and Small Children

Safe D

riv

Make sure the child restraint system is
firmly secured by rocking it forward and
back and side to side; little movement
should be felt.

Make sure any unused seat belt that a child
can reach is buckled, the lockable retractor
is activated, and the belt is fully retracted
and locked.

Installing a Child Seat with a Lap/Shoulder Seat Belt

To deactivate a lockable retractor, release the buckle
and allow the seat belt to wind up all the way.

Summary of Contents for 2012 ZDX



















































































































































































































































































































































































Search results

Summary of Contents for 2012 ZDX

Reviews:

Related manuals for 2012 ZDX

Brands by name

Popular brands

Acura 2012 ZDX, Owner'S Manual

Search results

Summary of Contents for 2012 ZDX

Reviews:

Related manuals for 2012 ZDX

Brands by name

Popular brands