Spark Plugs
2. Disconnect the three ignition coils
from the wire harness by squeez-
ing the harness end of each
connector and pulling.
3. Remove the two 10 mm bolts
holding the ignition coil. Remove
the ignition coil by pulling it
straight out as you twist it slightly.
4. Use a 16 mm (5/8 in.) spark plug
socket, with a 6 in. extension, to
remove the spark plug.
5. Put the new spark plug into the
socket, then thread it into the hole.
Screw it in by hand so you do not
crossthread it.
Maintenance
IGNITION COIL
10 mm BOLT
SPARK PLUG SOCKET
Summary of Contents for 1995 NSX
Page 28: ...Safety Labels EXPANSION TANK CAP JUMP START Driver and Passenger Safety...
Page 183: ...Lights On cars with removable roof On the standard model Maintenance INTERIOR INTERIOR TRUNK...
Page 219: ...Fuses Under hood Fuse Box Canadian model Taking Care of the Unexpected...
Page 227: ...Specifications Technical Information page 163 page 220 page 221 page 221...