Removable Roof Panel
If the wind noise feels unpleasant
while you are driving with the roof
panel removed, you can reduce the
noise by inserting a plug in the hole
located at each side of the rear roof
pillar. These plugs are stored in the
glove box.
Do not use any plugs other than the
ones that came with your car. Other
objects may damage the mechanism
in the roof pillar, causing the roof
panel mechanism to jam or to not
atch the roof properly.
Installing
Because it is stored above the engine
compartment, the roof panel can get
hot while driving. Allow it to cool
down for several minutes before
attempting to remove it from the roof
holder.
1. Open both windows.
2. Turn off the engine and set the
parking brake.
3. Open the rear window (see page
56
).
4. Open the roof cover by pulling up
the release lever. Unsnap the hook
from the window frame and use it
to hold up the roof cover.
5. Remove the roof from the holder
by pulling it back slightly, then up.
6. Make sure the roof panel release
levers are in the unlocked (down)
position.
Instruments and Controls
CONTINUED
Summary of Contents for 1995 NSX
Page 28: ...Safety Labels EXPANSION TANK CAP JUMP START Driver and Passenger Safety...
Page 183: ...Lights On cars with removable roof On the standard model Maintenance INTERIOR INTERIOR TRUNK...
Page 219: ...Fuses Under hood Fuse Box Canadian model Taking Care of the Unexpected...
Page 227: ...Specifications Technical Information page 163 page 220 page 221 page 221...
