Fuses
Checking and Replacing Fuses
If something electrical in your car
stops working, the first thing you
should check for is a blown fuse.
Determine from the chart on pages
220
and
221
, or the diagram on the
fuse box lid, which fuse or fuses
control that component. Check those
fuses first, but check all the fuses
before deciding that is not the cause.
Replace any blown fuses and check
the component's operation.
1. Turn the ignition switch to LOCK
(0). Make sure the headlights and
all other accessories are off.
2. Remove the cover from the fuse
box.
3. Check each of the large fuses in
the under-hood and engine com-
partment fuse boxes by looking
through the top at the wire inside.
Removing these fuses requires a
Phillips-head screwdriver.
4. Check the smaller fuses by pulling
out the fuse with t h e fuse puller
provided in the interior fuse box.
Taking Care of the Unexpected
BLOWN
FUSE PULLER
Summary of Contents for 1995 NSX
Page 28: ...Safety Labels EXPANSION TANK CAP JUMP START Driver and Passenger Safety...
Page 183: ...Lights On cars with removable roof On the standard model Maintenance INTERIOR INTERIOR TRUNK...
Page 219: ...Fuses Under hood Fuse Box Canadian model Taking Care of the Unexpected...
Page 227: ...Specifications Technical Information page 163 page 220 page 221 page 221...