EN -
15
IT
EN
DE
FR
ES
RU
ACTUATECH S.p.A.
Via S. Lorenzo, 70, 25069 Villa Carcina (BS) Italy
Ph.
+39 030 8908142 •
Fax
+39 030 8908143 • [email protected] •
www.actuatech.com
Reference MAN81566 - 05/21
INSTRUCTION MANUAL
RP: RACK & PINION PART TURN PNEUMATIC ACTUATOR
RP10 - RP480
8.1 Double acting (DA) angle setting instruction
Opening Setting instruction:
A
. Take pressure off, disconnect air feeding and make sure that air ports have been completely vented;
B
. Act on the grub screw (see arrow);
C
. Unloose counter-nut (A1);
D
. Feed port (2) with a low pressure (for a small movement only) in order to put pistons in home position;
E
. Using an Allen wrench, screw or unscrew grub screw (A) to obtain angle setting required (range ± 5°);
F
. Once adjusted, lock the grub screw (A) using an Allen wrench and screw counter-nut (A1) according to torque indications;
Closing Setting instructions:
A.
Take pressure off, disconnect air feeding and make sure that air ports have been completely vented;
B.
Act on the grub screw (see arrow);
C.
Unloose counter-nut (B1);
D.
Feed port (4) with a low pressure (for a small movement only) in order to put pistons in home position;
E.
Using an Allen wrench, screw or unscrew grub screw (B) to obtain angle setting required (range ± 5°);
F.
Once adjusted, lock the grub screw (B) using an Allen wrench and screw counter-nut (B1) according to torque indications;
Setting range
Setting range
Pistons home position
Pistons end position