44
45
Appendix A
Appendix A
XlII
XlII
Services Configuration
Click the
Services
tab, and make sure the following default services are listed. These are
installed by default when you initially installed TCP/IP. Note that not all of the servic-
es listed below are required for the Actiontec Home Gateway. For additional informa-
tion, refer to your NT Workstation documentation or Microsoft support services.
Computer Browser
RPC Configuration
Server
Workstation
If you need to add a Service, click
Add
and do so.
Protocol Configuration
Click the PROTOCOLS tab, and then verify that the TCP/IP Protocol is listed. If it is
not, add it.
Configuring TCP/IP For Windows NT 4.0
Please make sure you have your Windows NT Workstation 4.0 installation disks or CD-
ROM handy before beginning. Windows NT Workstation 4.0 may need to copy some
driver information during the configuration process. If your Ethernet card was supplied
with a driver diskette, be sure to have that available as well.
Note:
As with all software, you should consult your users manual or the help files
for detailed information. Actiontec provides the information that follows as a
guideline only.
Network, Username, Computer Name Identification
To configure your NT Workstation v 4.0 click
Start
, go to
Settings
and then to
Control
Panel
. In Control Panel, double-click the
Network
icon. In the Network dialog box,
click the
Identification
tab and enter a Computer Name if needed and a Work Group.
Note:
Do not change both Computer name and Workgroup at the same time.
Change one first and then restart. Then change the other and restart a second
time.
Appendix A
Summary of Contents for R1020S(U)
Page 37: ...72 Notes Notes...
