manualshive.com logo in svg

Action S002146, Instruction Manual

Share
Download
Action S002146 Instruction Manual Download Page 23

  [email protected]

MODEL: S002146

AFTER SALES SUPPORT

  

  1800 465 070

23

How to Use the Treadmill (cont)

Starting the Treadmill

To start the treadmill simply plug in the power cord and turn on the switch. You will hear a signal tone and the 
screen of the console will light up.

There is an over-current protector located on the right side of the switch (see above picture); in case of short circuit 
or over-current, the button of the over current protector will pop up and the treadmill will power off. Please unplug 
the power source and push down the button and then turn on the switch to restart your workout. If the button pops 
up again, please contact our National Service Centre on 1800 465 070.

The treadmill will only work if the Safety Key (45) is attached to the groove in the console. Insert the Safety Key 
(45) and attach the clip onto your clothes. If it is necessary to turn off the motor immediately, just pull the Safety 
Key (45) out of the console.
NOTE: If the Safety Key is not placed correctly or is faulty, the “Distance” window will display “E00”, which indicates 

that the treadmill will not operate. If the Safety Key falls off during exercise, the console will give an audible signal 
and “Distance” window will display “E00” and the treadmill will stop. 

Summary of Contents for S002146



































Reviews:

No comments

Brands by name

Popular brands

Load more brands