Actidata actiLib Kodiak 3407 Quick Start Manual Download Page 8

Page: 8 / 42

/ 42

AVERTISSEMENT

Poids du produit

Risque de blessure

Avant de soulever un module:

▪

Respectez les règles locales de santé et de sécurité au
travail ainsi que les instructions concernant la
manipulation du matériel.

▪

Retirez toutes les cartouches à bande pour réduire le
poids

▪

Retirez toutes les lecteurs de bande pour réduire le
poids

▪

Faites-vous assister de manière adéquate pour soulever
et stabiliser le périphérique pendant l’installation ou le
retrait.

Risque d'endommager les périphériques

Lors de l'insertion d'un module dans un rack ou du retrait
d’un module d'un rack:

▪

Les vérins de mise à niveau doivent être en contact
avec le sol.

▪

Les vérins de mise à niveau doivent supporter tout le
poids du rack.

▪

Installez le kit de mise à niveau sur le rack.

▪

Déployez un seul élément de rack à la fois. Si vous
déployez plusieurs éléments à la fois, vous risquez de
compromettre la stabilité du rack.

CAUTION

Static Sensitive

Risk of damage to devices

▪

A discharge of static electricity damages static-sensitive devices or

micro circuitry.

▪

Proper packaging and grounding techniques are necessary

precautions to prevent damage.

ATTENTION

Électricité statique

Risque d'endommager les périphériques par une décharge
d’électrostatique.

▪

Une décharge d'électricité statique peut endommager les circuits
imprimés du système ou les autres périphériques sensibles aux
décharges électrostatiques

▪

Un emballage approprié et une mise à la terre constituent les
précautions nécessaires pour éviter tout dommage.

NOTE

▪

Ventilation

– Place the product in a location that does not interfere with

proper ventilation.

▪

Heat

– Place the product in a location away from heat sources.

▪

Power sources

– Connect the product to a power source only of the type

directed in the operating instructions or as marked on the product.

▪

Power cord protection

– Place the AC line cord so that it is not possible to be

walked on or pinched by items placed upon or against it.

▪

Object and liquid entry

– Insure that objects do not fall onto and that liquids

are not spilled into the product’s enclosure.

Summary of Contents for actiLib Kodiak 3407











































Search results

Summary of Contents for actiLib Kodiak 3407

Reviews:

Related manuals for actiLib Kodiak 3407

Brands by name

Popular brands

Actidata actiLib Kodiak 3407, Quick Start Manual

Search results

Summary of Contents for actiLib Kodiak 3407

Reviews:

Related manuals for actiLib Kodiak 3407

Brands by name

Popular brands