29
/ 42
Aligning and Connecting Modules
Skip this step if the library does not have Expansion Modules
.
Aligning the modules ensures that the robot can move freely between the modules. The library will not
operate unless the alignment mechanism is in the locked position.
1. From the front of the library, loosen the screws on each of the modules two full turns.
2. From the back of the library, starting with the bottom pair of modules, align each module with the
module below. Repeat for each pair of modules.
a.
Move the alignment lever to the lock position. If you encounter resistance, adjust the position of
the upper module so the pin in the alignment mechanism moves into the mating hole in the lower
module.
