33
/ 42
•
LED flashing slowly: unlock operation in process
•
LED flashing quickly: mailslot or magazine is unlocked and can be removed
Example: 3-module-library with mailslots enabled on the top 2 modules
NOTE
You can also open mailslots or magazines through the Operation > Open
Mailslot or Operation > Open Magazine page on the RMI. Opening mailslots or
magazines through the OCP is not possible.
Labeling Tape Cartridges
Barcode labels are recommended in production environments to improve inventory time in the library and
ease cartridge handling processes outside the library.
Using the Mailslot
If the mailslot is enabled (indicated by the right button LED steady ON), you can use it to load cartridges
into the library.
1. Press the right button for less than 3 seconds. This will start the unlock operation for the mailslot,
indicated by the LED slowly flashing.
2. When the mailslot is unlocked the LED starts quickly flashing
3. Pull out the mailslot from the library. As soons as the mailslot is pulled out, the LED switches OFF.
NOTE
•
The mailslot is attached to the magazine and cannot be removed completely
•
The mailslot will relock after 30 seconds.
!
IMPORTANT
•
You can enable mailslots only through the Configuration >
Mailslots page on RMI. Enabling the mailslots through the OCP
is not possible.
•
Wait before pulling out the mailslot until the LED is quickly
flashing and OCP message says that the mailslot is unlocked
