22
/ 42
Unpacking Base Module and Expansion Modules
Before unpacking any modules, clear a work surface near the targeted rack or table for installation.
CAUTION
If the temperature in the room where the library will operate varies by
15° C (30° F) from where the module was stored, allow it to acclimate for
at least 12 hours prior to unpacking.
Unpacking a actiLib Kodiak 3407 Base Module or Expansion Module:
1. Before opening and removing a module from the box, inspect the container for shipping damage.
2. If you notice any damage, report it to the shipping company immediately.
3. Unpack the module from the box and place it on a work table
4. Skip the next steps if you are installing an Expansion Module only
5. The robotics is protected during shipment by an insertion foam which has to be removed prior to
installation
6. To remove the top cover plate from the Base Module unlock the top cover using two small screwdrivers
