actiLib Autoloader 1U
– User and Service Guide
Page 14 of 97
Number Description
1
Left magazine with Mail slot
2
Power button.
Pressing the button will initiate a controlled Power Down of the unit (soft power
down
3
LED
“READY”
(Green).
Illuminated when power is on. Blinking when there is tape or loader robotics activity.
4
LED
“CLEAN”
(Amber).
Illuminated when the tape drive has determined that a cleaning cartridge should be
used. Cleaning is only necessary when the loader directs you to do so. Additional
cleaning is not necessary.
5
LED
“ATTENTION”
(Amber).
Illuminated if the loader has detected a condition that requires attention by the
operator.
6
LED
“ERROR”
(Amber).
Illuminated if an unrecoverable tape drive or loader error occurs. A corresponding
error message displays on the LCD screen (see for more information).
7
Control key
“UP”
button
The UP button is used to navigate through menu items.
8
Control key
“CANCEL”
button [X]
The CANCEL button is used to cancel a user action and return to the last menu
item.
9
Right Magazins
10
Air vents
11
Control key
“DOWN”
button [<]
The PREVIOUS button is used to navigate backward through menu items.
12
Control key
“ENTER”
button [
]
The ENTER button is used to go to a sub menu or execute an action.
13
Front panel
“OCP” display, consisting of 2x16 characters
The OCP screen displays actions and status information, menu items or error
messages equivalent to the operation mode.
Table 1 Front panel overview
