actiLib Autoloader 1U
– User and Service Guide
Page 31 of 97
7.1.5.2
Toggle values
Toggle values are used to switch between two different states like
On
and
Off
. After navigating
to the menu item the display shows the actual state. Pressing the ENTER button will switch to
the possible new state. Pressing ENTER a second time will take over this new state. This
procedure works vice-versa.
7.1.5.3
Numerical values
Numerical values are needed for network addresses, PIN entries and other configuration
entries. After navigating to the menu item which should be changed the actual value will be
displayed and the cursor stays on the first digit. The value can be incremented / decremented
with the (<) and (>) button. After pressing the ENTER button the cursor is set to the next
editable digit. It can be changed in the same way. After pressing the ENTER button at the last
digit the complete entry will be stored. Pressing the CANCEL button will cancel the whole edit
process and the old value is valid again.
7.2
Power ON/OFF
Part of the operator control panel is the Power On/Off button. Pressing this button will initiate a
controlled Power Down of the unit (soft landing). The following operations will take place before
the unit shuts down completely:
The display indicates with an appropriate message that the shutdown is in progress
The library controller finishes all ongoing loader and drive activities
The robotics is moved to its home position
The library controller switches off the power supply’s secondary side
To abort the shutdown process the user has to press Cancel within the first 3
seconds
