Actia LEXIA3 CHRONO User Manual Download Page 167

Page: 167 / 171

LEXIA3 User Guide

Appendices - 163

ppendices

DVD

: I cannot access the contents of a CD-ROM or a DVD-ROM.

• Check the USB connection with the PC Tablet or the common connector (HUB).

• If using with a common connector (HUB), check that the common connector (HUB)

is operating properly.

• Check the external power supply.
• Check that the button is set to

• Check that the disk surface is clean and undamaged (not scored).

PRINTER:

I am unable to print.

• Check the USB connection with the PC Tablet or the common connector (HUB).
• If using with a common connector (HUB), check that the common connector (HUB)

is operating properly.

• Check the external power supply.
• Check that the button is set to

• Check that the printer has paper and that the ink cartridges are OK.

Summary of Contents for LEXIA3 CHRONO












































































































































































Search results

Summary of Contents for LEXIA3 CHRONO

Reviews:

Related manuals for LEXIA3 CHRONO

Brands by name

Popular brands

Actia LEXIA3 CHRONO, User Manual

Search results

Summary of Contents for LEXIA3 CHRONO

Reviews:

Related manuals for LEXIA3 CHRONO

Brands by name

Popular brands