Actia LEXIA3 CHRONO User Manual Download Page 147

Page: 147 / 171

Manuel d’utilisation LEXIA3

- Using the LEXIA3 package - 143

Using the

LEXI

package

• Press the

Connection

key to connect to Internet.

• The connection is made.

PCAnywhere is run automatically in Wait for connection mode

. PCAnywhere

is run as a background task, and waits for the call from the master (colleague or
technical expert). The icon is visible in the tool bar.

Request Teleassistance reference

. When the connection is made, LEXIA3

automatically interrogates the Internet provider server, to obtain the reference
assigned to the Teleassistance operation.

Display Teleassistance reference

. The reference that you have to give (by

telephone) to your colleague or to the technical expert is displayed on a screen.

Summary of Contents for LEXIA3 CHRONO












































































































































































Search results

Summary of Contents for LEXIA3 CHRONO

Reviews:

Related manuals for LEXIA3 CHRONO

Brands by name

Popular brands

Actia LEXIA3 CHRONO, User Manual

Search results

Summary of Contents for LEXIA3 CHRONO

Reviews:

Related manuals for LEXIA3 CHRONO

Brands by name

Popular brands