www.acti.com
Hardware Manual
8
Setting Up the Player
Connect the Player
Follow the sequence of steps below to connect peripheral devices to the MDS.
1.
Connect MDS-100 to the network via Ethernet cable.
2.
Connect the monitor to the MDS via HDMI cable, then power up the monitor.
NOTE:
Make sure to follow this step before powering up MDS to ensure the media
display station adapts the monitor resolution.
3.
Connect the device to the power source.
4.
The devices will boot up. After the system initializes, a
registration number will appear on the monitor. Write down
this number.