![background image](http://html1.mh-extra.com/html/acti/a1d-220-v3-14-19-ac/a1d-220-v3-14-19-ac_user-manual_2842786051.webp)
51
*Pre-requisites:
SMTP server / HTTP CGI server setup.
*Pre-requisites:
SMTP server / HTTP CGI server setup.
low when the event ends.
Interval determines the minimum duration of
each DO response( in seconds). DO will remain at the active level during this
time, and if another event triggers DO before the end of the first DO, the
second trigger will no take effect. 0 means there is no minimum duration.
Notification messages:
Notification messages
may be sent to either an email or a HTTP CGI
server. If sent to an CGI server, it works the same as an URL command, but
it does not allow a second message at end of event. You may configure up to
three preset massages. You can configure a message, but disable it. This will
allow you to keep the settings without using it, which will be useful in testing
and troubleshooting.
To setup Notification Messages, make sure to
enable the message,
then
determine what type of message to send (HTTP CGI or email).
If you are sending to CGI server, you need to enter the CGI path
,
the URL command itself
, and an optional message
.
If you are sending email
, please enter the receipient address
, the
email subject
, and the body message
. Click
[Apply] to use these
settings or click
[Reset] to clear changes.