![background image](http://html1.mh-extra.com/html/acti/a1d-220-v3-14-19-ac/a1d-220-v3-14-19-ac_user-manual_2842786057.webp)
57
location, it increases the bitrate from 750k to 3M, and the frame rate from 4
fps to 8 fps. The bitrate / fps changes are reverted at the end of event.
Go to a preset point (selected models only)
For PTZ cameras, there will be an extra option available. This will
require the camera to move to a preset location. In this interface you will
setup which preset point to go to, and how long do you want the camera to
stay there.
At the end of event, the PTZ camera will return to the position right
before the event. The difference between this and the PTZ via URL
command scenario is that this only performs the PTZ move, without the
ability to aggregate multiple other changes into the same trigger.
Be sure to do Save and Reboot after you’ve updated the event settings.
Only then will the settings be commited to physical memory. You may lose
the settings to power loss or other situations if you do not do this step.