![background image](http://html1.mh-extra.com/html/acti/a1d-220-v3-14-19-ac/a1d-220-v3-14-19-ac_user-manual_2842786068.webp)
68
1.3.21 Factory Default
This section tells you how to load IP device’s factory default setting.
STEP1
: Click the [Factory Default] on the “Main Setup page”.
The “Factory default setting page” is displayed as below
STEP2:
Click the checkbox
to preserve WAN and HTTP
settings from factory default.
STEP3
: Click the [Apply] button to go to loading confirmation page or
click the [Reset] button to exit to previous page.
STEP4
: A confirmation page will be displayed. Click the [Save
Reboot] button to start loading factory default settings.
1.3.22 Save Reboot
This section tells you how to save all the settings and reboot this IP device.
This is critical because some settings might not take effect before save and
reboot.
STEP1
: Click the [Save and reboot] on the “Main Setup page”.
The “Save and reboot page” is displayed as below.