![background image](http://html1.mh-extra.com/html/acti/a1d-220-v3-14-19-ac/a1d-220-v3-14-19-ac_user-manual_2842786025.webp)
25
1.3.5
Date Setting
This section tells you how to setup IP device’s date and time settings.
STEP1
: Click the [Date Setting] on the “Main Setup page”.
The “Date setting page” is displayed as below
STEP2
: Configure these settings with reference to the table below. If
you are still unsure what to set, contact your system administrator.
■
Date
Setting
Parameters
Description
SNTP/NTP
server
Click this to enable IP device
’s SNTP/NTP function.
SNTP/NTP function enables this video to synchronize its time
settings with a SNTP/NTP server. You can use this function to
make sure all your IP devices
’ time is the same. Additionally,
with our embedded digital-time-code in the streaming, you can
tell the event sequence accurately.
IP address
: Enter the IP address of the SNTP/NTP
server.
Sync time
: Select the time interval for this IP device
to synchronize its time.
Set manually
Click this to manually setup the date & time.
Date
: Select the date
Time
: Select the time
Time zone
Select the time zone offset for local settings