SPM-32A ... SPM-36A
3.2 Power supplies
3-9
3.2.3
Important note for all instruments
Help to protect our environment
The instruments contain
•
one lithium battery,
•
two NiMHs or two dry batteries.
The batteries contain heavy metals which may represent an
environmental hazard when they are disposed of at the end
of their useful life or when the instrument is scrapped.
Dispose of the batteries by returning them to the appropriate
collection point for used batteries, or to a company
specializing in the recycling of such items, or to the place
where new batteries are purchased.
Batteries purchased from Acterna can be returned to your
nearest Acterna service center.
Removing the lithium battery before scrapping the
instrument
The following tells you how to remove the lithium battery
from the instrument.
1. Unscrew the lower enclosure shell.
2. Remove the chassis from the upper enclosure shell.
3. Remove the screening.
4. Hold the chassis so that you can see the display unit.
5. The lithium battery is on the left-hand side of the CPU
board (2033-A2) below the display unit. Cut the
connecting leads and dispose of the lithium battery as
described in the section “Protecting the environment”.
Summary of Contents for SPM-32A
