Actel Core1553, User Manual, Page: 18 / 38

Core1553BRM Demonstration Design
1 8
• ZZ indicates the settings for switches 6 to 8, but does not affect operation.
Example display:
Core1553BRM NT00
Qualification Testing mode
While in Qualification Testing mode:
• X: Q = Qual mode; P = Qual mode, RT address parity error detected
• Y: T = Transceiver mode (only)
• ZZ indicates the RT address
Example display:
Core1553BRM QT01
HyperTerminal Commands
Table 2-2 lists the available commands for use in controlling the demonstration design via
HyperTerminal.
HyperTerminal Commands Examples
Display register at location 00:
BRM1> R 00 [RETURN]
Set the value of register 00 of BRM unit 1 to 1234h:
BRM1> R1:00=0000 1234 [RETURN]
Display memory at location 0a00:
BRM1> M 0a00 [RETURN]
Set memory at location 0a00 of BRM unit 1 to value 1234h:
BRM1> M1:0a00=0000 1234 [RETURN]
Note: The system does not support backspace/delete. Use ESC and re-enter the command if an error
is made.
Table 2-2 • Core1553BRM Demonstration Terminal Commands
Commands Function Format
1 Access BRM core 1 –
2 Access BRM core 2 –
# Comment –
[ Handle commands without full echoing,
Command File mode
–
] Use full echoing, Interactive mode –
C Compare memory c 0a00 bcda
Esc Exit back to main prompt –
I Clear interrupts –
K TCLK is 1 MHz –
M Display/set memory to hex value m 0a00 [1234]
R Display/set register to hex value r 00 [1234]
T Test register t 00 1234
X Clear compare fail LED and TCLK counts on 1553B
syncs –
Z Stop interrupt logging –