ONE-TO-ONE
In
One-To-One Mode
, any known card may be assigned to any of the first 30,000 users. If the site
code and card number are known then they may be entered in from the keypad or the card may
also be presented to a reader (similar to Learn Mode).
CARD VALIDITY
The
Card Validity
menu allows all users to be assigned a validity period. A user is considered
invalid if the current date is not within the validity dates.
Group Set-up
A
Group
provides means to manage which users are allowed access to specific doors at specific
times. A group consists of 8 timezones/Doors combinations plus options. The
Group Setup
menu
allows the operator to configure these groups.
Any of the 30,000 users may be assigned to one of 1024 groups.
A group is selected by either using the
0
key to advance to the required group, or alternatively by
using the numeric keys
1-9
to directly enter the number of the desired group. The top line of the
display shows the name of each group if one has been entered, otherwise the number will be
displayed.
ENABLE
Enable
the displayed group by pressing the
✔
key. This means that the cards or tokens belonging
to all users in the group will be recognized and will be allowed entry to the protected area provided
that the individual users are also enabled.
DISABLE
Disable
the displayed group by pressing the
✔
key. This means that the cards or tokens belonging
to all the users in the group will no longer be recognized and will not be allowed entry to the
protected area even if the individual users are enabled.
ASSIGN NAMES
The
Assign Names
function allows a 16 character textual name to be assigned to each group.
Pressing the
✔
key selects text entry mode. The group name is entered or deleted in exactly the
same fashion as for individual user names.
ACCESS RIGHTS
The
Access Rights
function allows up to 8 timezone and door combinations to be specified for all
users in a group. When a group is selected, the combinations will be displayed on the top line of
the display in the form
AB -.
The
0
key may be used to highlight one of these
combinations and the bottom line of the display will show that timezone and door combination.
Pressing the
✔
key allows the combination to be altered.
ACTpro 3000 Operating Instructions
Firmware Version 1.24
5
Initially, the display will show the batch as Not Assigned. Pressing the
4
key prompts the user to
enter a 10 digit number of the first card in the batch, once entered and the
4
key pressed again the
user will then be prompted to enter the 10-digit number of the last card in the batch. Note: If the
card number has less then 10 digits then enter the number with leading 0’s so that it has 10 digits
eg card number “60775” must be entered as “0000060775”
If the cards entered are already assigned to another batch, then the user is prompted to try again.
The display will then request the user number to be assigned to the first card in the batch.
The usual site coded cards are disabled if any batch cards are assigned on the system.
However, site coded cards may be entered as a batch. Learned cards operate as normal.
