ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
32
5 .7 .2 Scaling
This menu item is only available at indicator value scaled.
By defining a scaling the measuring range can be rescaled into any desired numerical range. This
allows e.g. the indication of the volume in liter.
The current measuring value is indicated in the display.
The input of the measuring range limits 0% and 100% are not mandatory. Values within the
measuring range e.g. 11% and 87% can be also input. In this case there is an automatic calculation
to 0% resp. 100%.
•
Lower display value
•
Upper display value
The input range is indefinite.
Default > Measuring value 0.000% = Display 0.000 / Measuring value 100.000% = Display 1.000
5 .7 .3 Unit
This menu item is only available at indicator value scaled
If a scaled indicator value is used, additionally an unit can be selected, that is indicated in the display
(not at indicator type vertical bargraph).
The unit is only indicated as text and is not included into calculations.
There are multiple predefined units in different categories available.
Mass
•
kg / t / lb
Volume
•
l / hl / m3 / in3 / gal / ft3
Height
•
mm / cm / m / in / ft
Pressure
•
mbar / bar / Pa / kPa / MPa / Psi / Torr / mmH2O
Flow
•
l/s / l/min / l/h / m3/s / m3/min / m3/h / lb/s / gal/s
Custom defined
Up to 10 characters can be input.
The input range is indefinite.
Default > no text allocated
5 .7 .4 Fractional Digits – E
The measuring value can be formatted by the use of fractional digits.
Is the indication of the measuring value with the current fractional digits number not possible, a
change to the correct fractional digits number is executed automatically.
The input range is limited to values from 0 to 3.
Default > 3
Summary of Contents for Sonicont USN4SP
Page 58: ......
