13
Set Column Change Time Setup
1. Remove top cover
2. Locate the program switch to the left of the finger print reader. Move the switch to the down
position, you are now in setup mode
3. Press
P3
a.
P3, P4, P5, P6 will now be flashing
4. If this is the initial setup you must begin with 01
5. Press P6 to save
6. Press P4 or P5 to select the correct hour for the first time slot
7. Press P6 to save
8. Press P4 or P5 to select the correct column
a.
Choose a column 1-6
9. Press P6 to save
10. Complete steps 4-9 until all slots are completed or to exit move the program switch to the up
position
Summary of Contents for ATR360
Page 8: ...4 Rear View...
Page 34: ...06 0400 000 Rev H...
