Acroprint ATR360, User Manual

Page: 15 / 34

11
Editing Shift Intervals
1. Open clock lid. Press "FP Setup" button
2.
Press "down" until the LED display shows "InO.S". Press "Enter". "PE.1” will be displayed.
Press "up/down" if you want to edit a different shift.
Press "Enter" to select the shift to edit. Edit the Start of Shift time (hrs : min). Press and hold
"Enter" for 3 sec. to set the Start time ("Pass" will be displayed indicating the start time was
correctly set).
Now edit the Start minute if necessary. Press and hold "Enter" for 3 sec. to
set the Start time.
3. Press "Up" or "Down" to select additional shifts for editing.
Shift
Shift Start
Time
Shift End
Time
PE1
PE2
PE3
PE4
PE5
PE6
PE7
PE8
PE9
PE10
PE11
PE12
Deleting a User’s Badge Number
1. Open clock lid and press "FP Setup".
2. "Add.U" is displayed.
3. Press “Down”. "dEL.U" is displayed.
4. Press “Enter”. Select the User/Admin to delete then press and hold “Enter” for 3 sec.
5. F.P.1 will flash (if the user has fingerprints enrolled). Press “Up” (skipping all fingerprints)
until “rFId” is displayed. Press “Enter”. If the badge is successfully deleted the LED display
will show “PASS”.
6. Press “FP Setup” & “Up”. “End.P” is displayed. Press “Enter” to exit FP Setup mode.