Version 9E1
User’s Manual, Nimbie Chorus NBCH07
SETUP F
EATURE
The Setup menu allows users to customize system settings and look up
system related information
To go to the Setup menu, turn on the power of
Master unit, patiently wait for the system to
complete initialization, until HDD COPY is shown
on the screen. Then, use the or key to scroll
to SETUP.
Refer to the flow chart below and use the
appropriate key for operation. Press the EXIT key
to give up and move upward to the last option or
function. Any setting that has just been applied
will take effect immediately.
SLEEP MODE Feature
This feature sets up the sleep mode so that when the Nimbie Chorus system
is idle after a certain period of time, it will enter sleep mode for power saving
purpose. All units will stop functioning and LED indicators will be off.
ENTER: Start SLEEP MODE function;
or : Scroll to other Setup Menu functions.
or : Scroll for available options;
ENTER: Confirm the selection and go on;
EXIT: Return to the previous screen.
The default setting for Sleep mode is OFF. Press the or key to switch
between available options such as “OFF”, “5min”, “10min” or “30min”. After
the setting is applied, the menu will return to the previous screen.
To wake up the system, press any key on the control panel of the Master unit.
After waking up from the sleep mode, all connected Client units will be
reinitialized.
IGNORE ERROR Feature
This feature decides whether the Nimbie Chorus system shall ignore error
while using LOAD IMAGE feature to extract disc images. The default setting is
OFF. You may set it to ON so that the error will be ignored during disc image
extraction.
Note:
Use with caution to avoid creating faulty image.
@ 2010, Acronova Technology, Inc.
31
