User’s Manual, Nimbie Chorus NBCH07
Version 9E1
G
ET
S
TARTED
AND
I
NSTALLATION
The Nimbie Chorus is an expandable disc duplication system which consists
one Master unit and up to seven Client units. You may start with one Master
and one Client, and plug-in additional Client units when more production
power is required.
Note:
It is not necessary to follow the Client number sequence. You
may connect the Client unit to any available NimbieCable
connectors on the Master unit. To help with identification, it is
recommended to label each Client unit with the corresponding
number as it is connected to the Master unit.
Finding a Place for the Nimbie Chorus System
The NBCH07 Master unit and its Client units should be placed on a fairly
leveled surface, firm enough to support all the units.
The Client unit should be placed close to the Master unit at a distance
reachable of NimbieCable. For identification purpose, it is recommended to
arrange the Client units in a sequence in which they are connected to the
Master unit.
Note:
Do not expose the system to direct sunlight or high humidity, as it
may cause the system to malfunction.
Nimbie Chorus System Installation
Follow the steps below to complete the Nimbie Chorus System installation:
1)
Make sure the power switch on the Master unit is turned off.
2)
Make sure the voltage setting on the rear panel of the Master unit is
properly set.
Warning:
An incorrect voltage power supply may damage the unit, the
system, or may result in poor quality discs.
3)
Place the Master unit and Client units side by side on a leveled surface.
12
@ 2010, Acronova Technology, Inc.
