User’s Manual, Nimbie Chorus NBCH07
Version 9E1
LINK Indicators
(Client Status)
Each LINK indicator individually shows the status of a
Client unit connected to this Master unit. See the next
section for more information.
LCD Display
The LCD display shows the menu item, the status and/or
the system information.
ENTER
Press to confirm the current selection and move forward to
next-level selection or to start the operation.
UP ( )
Press to display previous available options.
DOWN ( )
Press to display next available options.
EXIT
Press for going back to the previous menu option. If press
and hold for more than two seconds, the system will abort
after finishing the current processing disc.
Ready Indicator
(Master Status)
Reflect the status of the Master unit. See the next section
for more information.
The LED Indicators
To the lower right of control cottons, the Ready indicator reflects the status of
the Master unit as listed. See the table below:
Ready Indicator Meanings
Steady Green
The Master unit is powered on and it is ready to work.
Blinking
The Master unit is in sleep mode, consuming the minimum
power for energy saving.
Off
The Master unit is turned off.
Above the LCD display, each of the LINK indicators reflects the status of a
corresponding Client unit. See the table below:
LINK Indicator
Meanings
Steady Green
The corresponding Client unit is successfully recognized.
Blinking
The Client unit is out-of-disc.
Flashing
Rapidly
The Client unit has encountered an error.
Off
The Client unit is not connected or the connection has
failed.
The Rear View
As illustrated below, on the rear panel of Master unit there are power socket,
power switch, ventilation holes, as well as, connectors for the connection of
Client units.
Warning:
Make sure the Voltage of the power source matches the setting
of the Voltage switch on the rear panel of the Master unit.
Incorrect voltage supply may instantly damage the unit.
10
@ 2010, Acronova Technology, Inc.
