Acromag XVME-6500 User Manual Download

Page: 4 / 93

XVME-6500

USER

’S MANUAL

Acromag, Inc. Tel: 248-295-0310

- 3 -

http://www.acromag.com

- 3 -

www.acromag.com

3.13.3 Intel

Virtualization Technology (Intel VT-x and VT-d) .................................................................. 32

3.13.4 Intel

Trusted Execution Technology (TXT) ................................................................................... 33

3.13.5 Intel

Turbo Boost Technology ...................................................................................................... 33

3.13.6 Intel

Active Management Technology ......................................................................................... 34

3.13.7 Intel

Matrix Storage Technology.................................................................................................. 34

3.13.8 Intel

Configurable TDP Technology ............................................................................................. 34

3.14 Thermal Management .............................................................................................. 34

3.14.1 Thermal Monitoring ...................................................................................................................... 35

3.14.2 Thermal Throttling ........................................................................................................................ 35

3.14.2.1 CPU Throttling (Hardware Controlled) ........................................................................ 35

3.14.2.2 Thermal Management (OSPM Controlled) .................................................................. 35

3.14.3 Memory Throttling ........................................................................................................................ 35

3.14.4 Thermal Management Hardware .................................................................................................. 35

3.15 Watchdog ................................................................................................................. 36

3.16 Expansion Sites ......................................................................................................... 36

3.16.1 XMC Modules ................................................................................................................................ 36

3.16.2 PMC Modules ................................................................................................................................ 37

3.16.3 PMC/XMC JTAG Interfaces ............................................................................................................ 37

3.16.4 XBRD-9060 I/O Expander Module ................................................................................................. 38

3.16.5 Power Available to Expansion Modules ........................................................................................ 38

3.17 VME Interface ........................................................................................................... 40

3.18 Front Panel Layout .................................................................................................... 41

4.0 FIRMWARE/BIOS INFORMATION AND CONFIGURATION ............................ 42

4.1 XVME-6500 Special BIOS Features .............................................................................. 42

4.2 Drivers and Utilities .................................................................................................... 42

5.0 SERVICE AND REPAIR ............................................................................................... 43

5.1 Service and Repair Assistance ..................................................................................... 43

5.2 Preliminary Service Procedure .................................................................................... 43

5.3 Where to Get Help ...................................................................................................... 43

6.0 SPECIFICATIONS ......................................................................................................... 44

6.1 Physical ...................................................................................................................... 44

Summary of Contents for XVME-6500






























































































Search results

Summary of Contents for XVME-6500

Reviews:

Related manuals for XVME-6500

Brands by name

Popular brands

Acromag XVME-6500, User Manual

Search results

Summary of Contents for XVME-6500

Reviews:

Related manuals for XVME-6500

Brands by name

Popular brands