Acromag XVME-6500 User Manual Download

Page: 3 / 93

XVME-6500

USER

’S MANUAL

Acromag, Inc. Tel: 248-295-0310

- 2 -

http://www.acromag.com

- 2 -

www.acromag.com

3.2.1 Power Options ................................................................................................................................ 21

3.2.2 Programmable CPU Power Limits ................................................................................................... 22

3.2.3 Power Management ....................................................................................................................... 23

3.2.3.1 ACPI System States ........................................................................................................ 23

3.2.3.2 ACPI Processor States .................................................................................................... 23

3.3 CPU ............................................................................................................................ 24

3.3.1 Active Processor Core Selection ...................................................................................................... 24

3.3.2 Turbo Boost Configuration .............................................................................................................. 24

3.3.3 PCI Express Graphics (PEG) ............................................................................................................. 24

3.4 Platform Controller Hub (PCH) .................................................................................... 25

3.5 System Memory ......................................................................................................... 26

3.6 Video ......................................................................................................................... 26

3.6.1 VGA ................................................................................................................................................. 26

3.6.2 Digital Display Interfaces ................................................................................................................. 26

3.6.2.1 DVI ................................................................................................................................. 27

3.6.2.2 HDMI .............................................................................................................................. 27

3.6.2.3 Integrated Audio ............................................................................................................ 27

3.6.3 Configuring the Primary Display ..................................................................................................... 28

3.6.4 Configuring the Video Memory....................................................................................................... 28

3.6.5 Video Display Options ..................................................................................................................... 28

3.7 Intel

High Definition Audio ........................................................................................ 28

3.8 SATA .......................................................................................................................... 28

3.9 General I/O ................................................................................................................ 29

3.9.1 SMBus and I2C ................................................................................................................................ 29

3.9.2 Low Pin Count (LPC) ........................................................................................................................ 29

3.9.3 Serial Ports ...................................................................................................................................... 29

3.9.4 USB .................................................................................................................................................. 30

3.10 Gigabit Ethernet ....................................................................................................... 30

3.11 Battery Powered Real Time Clock (RTC) .................................................................... 31

3.12 Security .................................................................................................................... 31

3.12.1 Trusted Platform Support ............................................................................................................. 31

3.12.2 Password Control .......................................................................................................................... 31

3.13 System Management ................................................................................................ 32

3.13.1 Intel

Hyper-Threading Technology ............................................................................................... 32

3.13.2 Enhanced Intel

SpeedStep Technology (EIST) .............................................................................. 32

Summary of Contents for XVME-6500






























































































Search results

Summary of Contents for XVME-6500

Reviews:

Related manuals for XVME-6500

Brands by name

Popular brands

Acromag XVME-6500, User Manual

Search results

Summary of Contents for XVME-6500

Reviews:

Related manuals for XVME-6500

Brands by name

Popular brands