microBlox® Signal Splitter
Model uBSP-P-1
Acromag, Inc. Tel: 248-295-0880
- 26 -
http://www.acromag.com
- 26 -
https://www.acromag.com
SPECIFICATIONS
Model Number
uBSP-P-1:
uB Module Signal
Splitter w/dual isolated
current/voltage outputs, plus an
AUX voltage output.
This carrier is DIN-Rail mounted and allows one plug-in microBlox® module to
drive two separately isolated voltage and/or current outputs.
The model “uB” prefix denotes
this as a member of the popular Acromag
microBlox®
family, while “
SP
” denotes
the SPlit output function, its
“
-P
”
suffix
denotes a Panel type carrier, and the trailing
“
-1
”
suffix denotes a single
microBlox® module channel. This carrier is DC-powered and includes CE and
UL/cUL Class I, Division 2 Approvals.
This carrier/splitter is normally mounted on standard 35mm
“T” Type DIN
rail.
The reconfiguration of splitter I/O for a module plugged into this carrier can be
done using a wired USB connection to a Windows-based computer or laptop
running USB reconfiguration software for the input module, or may optionally
use a USB-OTG cable connection to an Android smartphone or tablet running our
free Agility App to set up an input module plugged into the carrier channel.
Analog (Field) Input
The Splitter input connects to TB1 terminals of this carrier. Input connections use
the same convention as modules mounted on uB back-panels and alarm carriers
(refer to your plug-in module instructions for wiring).
Accuracy:
Better than
0.05% of span typical relative to the installed module
plus an additional
0.05% of span relative to its operation on this carrier, for a
net combined accuracy of ±0.1% of span. This includes the effects of
repeatability, terminal point conformity, and linearization, but does not include
sensor error.
Input (field) specifications are specific the microBlox® input module plugged into
this carrier. Refer to your module
’s
instructions for detailed field connections.
The following uB input model types are compatible with this alarm carrier (the
uB45 frequency model is not compatible with this carrier for splitter
functionality):
The input to this carrier belongs to
the specific uB input module
plugged into it. Refer to your
module’s instructions fo
r detailed
input and connection
specifications.
Table 1: uB Plug-In Module Types That May Utilize this Carrier
uB Model
Nominal Module Input
uB31/uB41
±1V to ±60V
uB30/uB40
±10mV to ±100mV
uB32/uB42
4-20mA/0-11.17mA DC
uB34/uB35
2/3/4-Wire Pt RTD
uB37/uB47
J/K/T/R/S Thermocouple
The uB module must be configured and set up for use on this carrier using either
a wired USB to Windows PC interface, or a USB-OTG connection to an Android
smartphone or tablet running Agility software.
Module field input, carrier power, and each isolated output must be wired and
configured for its intended input/output type (see Electrical Connections section
for details).
I/O Cable Length:
For rated performance, I/O port interface cables should not
exceed 30m in length.