microBlox® Signal Splitter
Model uBSP-P-1
Acromag, Inc. Tel: 248-295-0880
- 12 -
http://www.acromag.com
- 12 -
https://www.acromag.com
AUX Voltage Output Connections
A third isolated voltage output is
available at TB5 (not a split output).
This independent output is driven by
the microBlox® module itself (see
module specifications) and is
common to the Host circuit and to
carrier USB.
Be careful to isolate USB connections
to the unit if you connect grounded
equipment to AUX.
CONFIGURATION SOFTWARE
This carrier supports all standard uB input model types (except uB45 frequency type) and allows module I/O and splitter
behavior to be programmed via a wired USB connection to Windows based personal computers/laptops, or a USB-OTG
connection to Android smartphones/tablets with the Agility APP. The Windows USB software for your model operates
like the Agility APP software. Below is a brief introduction to set up and calibrate using the Agility mobile app and a USB-
OTG connection to your Android or iOS smartphone or tablet. You can download the Agility software free of charge from
our web site at
Note:
Note that while this splitter also supports the reconfiguration of Bluetooth wireless technology enabled input
models for use on this splitter, its splitter functionality cannot be configured wirelessly, only via a wired USB connection.
This splitter and its USB software can be used to reprogram all uB input module types except uB45 using a wired USB
connection to a Windows based PC, or by using Aglity and a wired USB-OTG connection to an Android smartphone or
tablet.