microBlox® Signal Splitter
Model uBSP-P-1
Acromag, Inc. Tel: 248-295-0880
- 25 -
http://www.acromag.com
- 25 -
https://www.acromag.com
ACCESSORIES
Software Interface Package
Software Interface Package/Configuration Kit
–
Order TT-SIP
•
USB Signal Isolator
•
USB A-B Cable 4001-112
•
USB A-mini B Cable 4001-113
•
Configuration Software CDROM 5040-TBD
This kit contains all the essential elements for configuring TT transmitters and
SP/uBSP Splitters. Isolation is recommended for USB port connections to these
transmitters and splitters and will block a potential ground loop between your PC
and a grounded input. A software CDROM is included that contains the Windows
software used to program TT transmitters and SP splitters.
USB Isolator
USB Isolator
–
Order USB-ISOLATOR
•
USB Signal Isolator
•
USB A-B Cable 4001-112
•
Instructions 8500-900
This kit contains a USB isolator and a 1M USB A-B cable for connection to a PC. This
isolator and cable are also included in TT-SIP (see above).
USB A-B Cable
USB A-B Cable
–
Order 4001-112
This is a 1 meter, USB A-B replacement cable for connection between your PC and
the USB isolator. It is normally included with the TT-SIP Software Interface Package
and with the isolator model USB-ISOLATOR.
USB A-mini B Cable
USB A-mini B Cable
–
Order 4001-113, used with model specific Windows USB
software to configure the splitter and optionally reprogram uB modules.
This is a 1 meter, USB A-miniB replacement cable for connection between the USB
isolator and the SP splitters. It is normally included in TT-SIP.
USB OTG Cable
USB OTG Cable
–
Order 5028-565, used with Agility and a wired USB-OTG to an
Android smart-phone or tablet
This is a 6 inch, USB On-The-Go cable for connection between the USB A-mini B
Cable and a mobile phone or tablet. It is required to use the Acromag Agility
™
Config Tool App.
Note that the Acromag Agility
™ Config Tool
is available free of charge, online at
the Google Play store. Software for all SP Series models is available free of
charge, online at www.acromag.com.