SERIES I/O SERVER MODULE
MIL-STD-1553A/B Bus Interface Module
________________________________________________________________________
16
Acromag, Inc. Tel:248-295-0310 Fax:248-624-9234 Email:[email protected]
www.acromag.com
Acromag has automated test equipment that thoroughly checks the performance of each
board. When a board is first produced and when any repair is made, it is tested, placed in a
burn-in room at elevated temperature, and retested before shipment.
Please refer to Acromag's Service Policy Bulletin or contact Acromag for complete details
on how to obtain parts and repair.
PRELIMINARY SERVICE PROCEDURE
Before beginning repair, be sure that all of the procedures in Section 2, Preparation for
Use, have been followed. Also, refer to the documentation of your carrier/CPU board to
verify that it is correctly configured. Replacement of the module with one that is known to
work correctly is a good technique to isolate a faulty module.
Acromag’s Applications Engineers can provide further technical assistance if required.
When needed, complete repair services are also available from Acromag.
WHERE TO GET HELP
If you continue to have problems, your next step should be to visit the Acromag worldwide
web site at
. Our web site contains the most up-to-date product
and software information.
Go to the “Support” tab to access:
Application Notes
Frequently Asked Questions (FAQ’s)
Product Knowledge Base
Tutorials
Software Updates/Drivers
An email question can also be submitted from within the Knowledge Base or directly from
the “Contact Us” tab.
Acromag’s application engineers can also be contacted directly for technical assistance via
telephone or FAX through the numbers listed at the bottom of this page. If needed,
complete repair services are also available.
SPECIFICATIONS
PHYSICAL
Physical Configuration
Length
3.880 in. (98.5 mm)
Width
1.780 in. (45.2 mm)
Board Thickness
0.062 in. (1.59 mm)
Max Component Height
0.290 in. (7.37 mm)
Connectors
IOS Logic Interface: 50-pin female receptacle header (AMP 173279-3 or equivalent).
Field I/O: 50-pin female receptacle header (AMP 173279-3 or equivalent).
Operating Temperature:
-40 to 85 C.
Relative Humidity:
5-95% Non-Condensing.
Storage Temperature:
-55 C to +125 C.
CAUTION: POWER MUST BE TURNED OFF BEFORE REMOVING OR INSERTING
BOARDS
