Model DT33x-0700
4-Wire DC I/V Dual Transmitter w/USB
Acromag, Inc. Tel: 248-295-0880
- 4 -
http://www.acromag.com
- 4 -
https://www.acromag.com
GETTING STARTED
DESCRIPTION
Symbols on equipment:
Means “Refer to User’s Manual
(this manual) for additional
information”.
The DT33x-0700 models provide two isolated ANSI/ISA Type IV transmitters with
isolated current or voltage outputs. Units may operate as dual transmitters, a single
channel transmitter, or a channel 1 signal splitter, and will interface with DC Current
or DC voltage input signals according to their model. They isolate each input, and
separately modulate two isolated DC outputs that may drive current or voltage.
Units are setup, calibrated, and rescaled using configuration software and a USB
connection to Windows-
based PC’s (Windows
7 and later), or an Android -based
tablet or smartphone running our Agility mobile app and connected via a USB-OTG
cable. Units provide adjustable and scalable input and output ranges, plus dual
output signal drive capability for voltage or current, input/output/power isolation
for each channel, and variable input filtering.
Key Features
•
Unit is digitally configured and calibrated w/ Windows software via USB, or
our Agility Android APP installed in a smartphone or tablet and connected via
a USB-OTG cable.
•
Dual Channels in a thin 17.5mm wide enclosure for high-density mounting.
•
Operates as a dual transmitter, a single transmitter, or a CH1 signal splitter.
•
High measurement accuracy and linearity with 16-bit I/O conversion.
•
Independently adjustable and scalable input and output ranges.
•
The DT336 input has a DC Current path for 0,4-20mA/0-11.17mA/ ±1mA and a
DC Voltage path for ±0.5V/0-500mV. DT337 channels have separate DC
Voltage input paths for up to ±1V, and up to ±10V. DT338 channels have
separate DC Voltage input paths for high-level ranges to ±15V, and ±150V
Battery Sources.
•
Variable input filter adjustment (none, low, medium, or high).
•
Separate short-circuit protected voltage and current output terminals at each
output supports ±10V, ±5V, 0-10V, 0-5V, or 0-20mA, 4-20mA output.
•
Output channels can transmit Normal or Reverse Acting output signals.
•
Reverse-polarity protected 6-32VDC power is bus/redundant power ready.
•
Wide ambient temperature operation from -40°C to +70°C.
•
Thoroughly tested and hardened for harsh environments.
•
CE Approved.
•
FCC Conformity Class B
•
cULus Listed - Class I/Division 2 - Haz. Loc., ATEX, & IECEx.
Application
For additional information on
these devices and related topics,
please visit our web site at
DT300 Dual Transmitters are designed for high-density mounting on T-type DIN
rails. Units may be mounted side-by-side on 0.7-inch (17.5mm) centers and support
6-32V DC power via terminals on the unit, or optionally via power wired to a DIN-
rail bus connector. Each channel isolates a wide range of current or voltage input
signals depending on model and can mate with grounded or non-grounded sensors.
Units drive isolated outputs that source current or voltage at each output channel
with support for 0-20mA, 4-20mA, or ±10V, ±5V, 0-10V, and 0-5V output ranges.
!
