ACR STOVES NEO Electric, User, Installation & Servicing Instructions

Page: 37 / 50

Fault Finding Checklist
ISSUE POSSIBLE CAUSE SOLVE
Frequent beeps for 3 seconds
while
motor turns.
1.Ba � eries (Receiver) are low Replace ba � eries (Quality Alkaline recommended).
Pilot Flame lights but there is no
main gas
fl ow
1.Manuals override knob (if
equipped) is in MAN posi
� on.
Turn Manual override knob to ON posi � on.
2.Valve turned down to pilot fl ow Turn fl ame to high fi re by pressing up bu � on on remote handset,
3.Valve Replace Valve. Do not over � ghten the Thermocouple Interrupter.
Latching Solenoid does not work. 1.Loose connec � on Check Connec � on is � ght and pins are straight
2.Latching Solenoid Replace Latching Solenoid
3.Receiver Replace Receiver and reprogram code.
4.Handset Check that the Handset shows the AUX-symbol if you press SET + UP
ISSUE POSSIBLE CAUSE SOLVE
Will not operate with handset 1. Transmi � er ba � eries low Replace Transmi � er ba � eries. Quality alkaline recommended.
2. Receiver ba � eries low Replace Receiver ba � eries with 1.5 V”AA” quality alkaline ba � eries.
3.Op � onal Mains Adapter not
opera � ng properly
Check Mains Adapter
4.Check coding of Transmi � er and
Receiver (Ini � al Sync.)
Learn new code (reset). See label on receiver.
5.Transmi � er distance limited 1. Straighten the Antenna
2. Replace Receiver, See wiring
diagrams, pg. 8-12, in the
opera � ng/installa � on instruc � ons for the GV60
36