ACR STOVES NEO Electric, User, Installation & Servicing Instructions

Page: 11 / 50

Symax Handset User Instruc � ons
NOTE: Either con � nue to PROGRAM 2 and set ON and OFF � mes or stop programming at this point, and PROGRAM 2
remains deac � vated.
NOTE: PROGRAM 1 and 2 use the same ON (Thermosta � c) and OFF temperatures for ALL, SA:SU and Daily � mer
(1,2,3,4,5,6,7) Once a new ON (Thermosta � c) and / or OFF temperature has been set, that temperature
becomes the new default se � ng.
NOTE: If ALL, SA:SU or Daily Timer are programmed for PROGRAM 1 and PROGRAM 2. ON and OFF � mes these become
the new default � mes. The ba � eries must be removed to clear the PROGRAM 1 and PROGRAM 2 ON and OFF
� mes and temperatures.
SA:SU or Daily Timer (1,2,3,4,5,6,7) selected
Set ON � me and OFF � me using same procedure as ALL selected (above)
SA:SU set ON � me and OFF � me for both Saturday and Sunday
Daily Timer: Unique ON and OFF � mes may be set for a single day of the week, for mul � ple day of the week, or for everyday
of the week.
Wait to fi nish se � ng.
2nd Burner Feature
The latching solenoid valve will open automa � cally a � er igni � on or a � er switching the system OFF , so
that the maximum fl ow of gas is supplied to both burners assis � ng with the igni � on process. A � er
pressing the bu � on for the 2nd Burner the motor will turn 7 seconds in the
ON
direc � on un � l the max.
posi � on is reached.
ON :
To switch a burner ON , press the bu � on displayed.
OFF :
To switch the burner OFF , press the bu � on disappears.
NOTE: The latching solenoid valve cannot operate manually. If the Receiver battery runs down it will
remain in the last opera � ng posi � on.
Light/Dimmer Opera � on
ON : Press button (is displayed). Light is ON at present level.
OFF : Press button (button disappears).
SETTING:
Press bu � on and hold un � l fl ashes. Adjust light between 20-100% using UP and DOWN.
To con fi rm se � ng either press bu � on or wait un � l bu � on is displayed.
NOTE: The light works independently of the pilot fl ame. If you want the light ON but no fl ames press bu � on
10