3.
Unpack the complete burner and insert the burner into the
combus
�
on chamber. Secure the burner to the base of the
appliance using the 4 bolts provided ensuring that the seal is
fully compressed on all sides. Please pay careful a
�
en
�
on to
make sure that the a
�
ached control box and associated
wiring are not trapped between the bo
�
om of the burner and
the combus
�
on chamber. Ensure that the
fl
exible gas supply
pipe is not damaged in any way and that it’s protruding from
the rear of the appliance, or if desired from the removeable
plate located in the pedestal.
2. Lift
out the perforated grate from the combus
�
on chamber.
Burner installa
�
on
Before connec
�
ng the burner please ensure that the gas supply pipework is in the correct
posi
�
on for connec
�
on to the unit, please ensure that the gas supply pipework is purged
and free from debris.
1.
To access the combus
�
on chamber please loosen the retaining bolt located in the
handle below the roller cam locking mechanism.
17
Summary of Contents for NEO Electric
Page 42: ...Technical Informa on 41...
Page 44: ...Dimensions NEO3FGAS NEO3PGAS NEO3CGAS NEO3WGAS 43...
Page 49: ...48...
