Acorn Mx-5100, User Manual

Page: 29 / 43

29
3.10.4 Disable
– User ID
This operation will cancel the current User ID and return to the default User 1. User 1 can perform all actions
except those defined as programmable (refer to the menu table).
[Disable] User 5 Node 1
ZONE/INPUTS OUTPUTS GROUPS
CONTROLS USER-ID
Press the

buttons to highlight the User-ID option and then press the
✔
button to select it.
[Disable] User 1 Node 1
ZONE/INPUTS OUTPUTS GROUPS
CONTROLS USER-ID
NOTE: If configured to operate with a timeout and if there has been no user activity after the programmable
period of time (default “No Timeout”), the panel will automatically cancel a User ID and return the panel to User
1 ID access. This is to ensure that access to restricted options is automatically cancelled.
3.10.5 Disable
– Groups
Disablement Groups are a means of disabling / enabling custom groups of devices. The commands are
command across the network of panels and can be invoked from any panel. The installer will have configured
these groups.
If no groups exist, selection of this option will show a NOT CONFIGURED message.
Some typical examples are:
Stage Smoke Detectors
Floor 2 Sounders
ALL Sounders
The display will show, for example:
[Disable Group] User 5 Node 1
Group Invoke Description
1 . - Stage Smoke Detectors
2 - Floor 2 Sounders
3 - ALL Sounders
Press the

buttons to scroll through and highlight the required option and then press the
✔
button to disable
it. The display will show that the command has been invoked (activated).
[Disable Group] User 5 Node 1
Group Invoke Description
1 . ok Stage Smoke Detectors
2 - Floor 2 Sounders
3 - ALL Sounders
The GENERAL DISABLE and any specific disable indicators will be illuminated on the panel(s).
www.acornfiresecurity.com
www.acornfiresecurity.com