Acorn Mx-5100, User Manual

Page: 27 / 43

27
If ONLY AUTOMATIC DETECTORS is chosen, the pop-up window disappears and the State of the Zone is
changed to PART DISABLED. Smoke and heat detectors are disabled.
If ONLY MANUAL DEVICES is chosen, the pop-up window disappears and the State of the Zone is changed to
PART DISABLED. Manual call points are disabled.
If ALL OTHER DEVICES is chosen, the pop-up window disappears and the State of the Zone is changed to
PART DISABLED. Other input devices are disabled.
3.10.2 Disable - Outputs
The Disable Outputs Option enables the isolation of some or all of the outputs. If disabled, the outputs will not
activate in the event of a fire alarm or other programmed event.
If the current User ID does not have the necessary permission, the display prompts for entry of a password to
guard against inadvertent changes.
[Disable]
Enter the password as normal. Once a valid password has been entered, a pop-up window is shown on the
display to select the type of outputs to disable. Scroll down to view / select the available options. The list below
details all of the possible options
– the available options will have been configured by the installation engineer.
ALL OUTPUTS
ALL SOUNDERS
ALL BEACONS
FIRE ROUTING OUTPUTS
FIRE PROTECTION OUTPUTS ↓
FAULT ROUTING OUTPUTS
ALL OTHER RELAY OUTPUTS
ONLY SELECTED OUTPUTS
PAGERS
3.10.2.1 All Sounder Outputs
Press the

buttons to scroll through and highlight the ALL SOUNDERS Option and then press the
✔
button
to disable them. The display automatically reverts to the Main Disable Menu.
The ‘Sounder Disabled’ Indicator will be illuminated.
3.10.2.2 All Beacon Outputs
Press the

buttons to scroll through and highlight the ALL BEACONS Option and then press the
✔
button to
disable them. The display automatically reverts to the Main Disable Menu.
NOTE: This only applies to individually addressable beacons. For some combined sounder/beacon devices, the
beacon follows the operation of the sounder and it is only possible to disable both the sounder and the beacon
together.
3.10.2.3 Fire Routing Outputs
Press the

buttons to scroll through and highlight the FIRE ROUTING OUTPUT Option and then press the
✔
button to disable all fire routing outputs. The display automatically reverts to the Main Disable Menu.
The ‘Fire Routing Disabled’ Indicator will be illuminated.
3.10.2.4 Fire Protection Outputs
Press the

buttons to scroll through and highlight the FIRE ROUTING OUTPUT Option and then press the
✔
button to disable all fire protection outputs. The display automatically reverts to the Main Disable Menu.
Please Enter Your Password
www.acornfiresecurity.com
www.acornfiresecurity.com