Acorn Mx-5100, User Manual

Page: 28 / 43

28
3.10.2.5 Fault Routing Outputs
Press the

buttons to scroll through and highlight the FAULT ROUTING OUTPUT Option and then press the
✔
button to disable all fault routing outputs. The display automatically reverts to the Main Disable Menu.
3.10.2.6 All Other Relay Outputs
Press the

buttons to scroll through and highlight the ALL OTHER RELAY OUTPUTS Option and then press
the
✔
button to disable them. The display automatically reverts to the Main Disable Menu.
3.10.2.7 Selected Outputs
✔
✔
Pager
Press the

buttons to scroll through and highlight the PAGER OUTPUT Option and then press the
✔
button
to disable all pager outputs. The display automatically reverts to the Main Disable Menu.
3.10.2.9 Only Selected Outputs
Allows selection of a single output.
3.10.3 Disable - Controls
Disabling Controls will cancel Level 2 access and return the panel to Level 1 operation.
If the panel has an access key switch fitted, use the key switch in preference to the menu option shown
below.
[Disable] User 1 Node 1
ZONE/INPUTS OUTPUTS GROUPS
CONTROLS USER-ID
Press the

buttons to highlight the Controls option and then press the
✔
button to select it.
The display then prompts for password entry. Enter the password as normal.
When a valid password has been entered, the control button functions and menu functions are disabled and the
level 1 menu display will be shown: -
[ CONTROLS DISABLED ]
ENABLE CONTROLS VIEW
LED-TEST STATUS
The display will automatically revert to the normal operating display after a few seconds.
www.acornfiresecurity.com
www.acornfiresecurity.com