Acorn Mx-5100, User Manual

Page: 15 / 43

15
3.4 Disablement Condition
If any zones, input devices or output devices have been disabled, the DISABLE Indicator is illuminated. In
addition, the SOUNDER DISABLE Indicator is illuminated if one or more sounder circuits or devices have been
disabled. The display indicates the presence of zone disablement conditions in the lower half of the display as
follows:
LEVEL 2
16:05
04 MAR 2006
4 Zones with Disablements More>
When the disablement conditions are removed, the appropriate indications are cleared from the display and
from the Indicators. When all disablement conditions are removed, the DISABLE Indicator is also turned off.
To obtain more detailed information about the disablement conditions, press the

button. The display will then
present the disablement conditions in the following sequence:

Zone / Individual Inputs.

Outputs
[DISABLEMENTS]
[ 2 ZONE(s)with INPUTS DISABLED] More>
[ 2 ZONE(s)with OUTPUTS DISABLED] More>
< Zone, disablement condition and
< location text
Press the

buttons to highlight the required option and then press the

button to view further information.
3.4.1 Disabled Inputs
The display presents a list of all of the zones in a disabled condition with the first disablement highlighted. For
example:
[ 2 Zones with Inputs Disabled] More>
ZONE MODE LOCATION
0001 PART DISABLED BASEMENT WEST
0002 ALL DISABLED BASEMENT EAST
< Zone, disablement condition and
< location text
The display shows the status as ALL DISABLED if every input device within the zone has been disabled and
shows the status as PART DISABLED if there is at least one input device within the zone still active.
Press the

buttons to highlight the required zone and then press the

button to view the location text
assigned to the zone in full. For example:
Press the

button again to view the inputs within the zone and their status. For example:
[ Inputs in Zone 0001 ] <More>
Mld Mode Device Text
/32 Disabled Room 244
The display shows the Device Number, current disablement condition (mode) and the device text. Press the

buttons to scroll through the inputs.
Press the

button to show further information on the state, type, analogue/digital values, the detection loop
(LP) and address (ADRS), etc. Press the
‘ESC’
key to return.
www.acornfiresecurity.com
www.acornfiresecurity.com