When all the camera settings are completed you can validate the angle values with the
Test
Camera
section.
Figure 20: Test Camera Section to check the Camera angle value
Each button move the camera at a specific position:
● Camera to the North
⇒
Move the camera to the North horizon direction
● Camera to the Mic 1
⇒
Move the camera to the same direction than the Microphone 1 of
the ATD-300/ATD-301 pod and on horizontal tilt level
● Camera to the Pan 0°
⇒
Move the camera to it’s 0° pan reference and on horizontal tilt
level
● Camera to the Ground
⇒
Move the camera to the ground, at the vertical tilt level.
Remark
:
● You can use the
Test Camera
function during the setting process to validate the 0° Pan
direction or the Tilt mode of your camera
ACOEM
|
ATD-300/ATD-301
|
User Manual FW 1.0.0.4 32
