4.11. Factory menus
On the ATD-300/ATD-301 web page, there are two last pages for troubleshooting and
maintenance.
Figure 29: Factory menus
On
Debug
page it will be possible to push specific frames on the ATD server during a specific
period. To be able to use this mode, the pod as to be connected to the ATD server and the
Frame record server address
setup on the
Settings
page. When the ATD-300/ATD-301 pod
is on debug mode, you will find
Enable
for
Debug recording status
on the
Status
page.
The
Calibration
page is only for maintenance to calibrate the microphone after repair. The
ATD-300/ATD-301 no need calibration during its lifetime.
ACOEM
|
ATD-300/ATD-301
|
User Manual FW 1.0.0.4 41
