13
For your safety
2.5 Non-approved parts
Prior to its market introduction, the separator plant had to pass all product tests and all
components were checked under high load.
Copies of high-quality spare parts are increasingly available. Installing non-approved
parts affects safety and rules out warranty by ACO.
In the case of an exchange, exclusively use original ACO parts or "spare parts released"
by ACO.
2.6 Material/substance hazards
Contact with light liquids (oil and petrol) may lead to infections.
2.7 Responsibility of owner
It is in the owner's responsibility that the following points are observed:
■
The separator plant must be operated in accordance with its intended use and in
proper condition, chapter 2.1.
■
Function of protective equipment must not be affected.
■
Service intervals must be kept and faults must be remedied promptly. Remedy faults
oneself only if relevant measures are described in this operating manual. For all
other measures, the ACO Service is in charge.
■
Sufficient number of required "personal protective equipment" (PPE) must be
available and must be worn, chapter 2.3.
■
This operating manual must be available at place of installation legibly and
completely and staff members must have been trained with this manual.
■
Only qualified and authorised staff members may be used, chapter 2.2
2.8 Warning signs for the separator
plant
The following warning signs apply to the separator plant.
Table 5:
Warning signs
Sign
Hazard
Plant component
For a safe and proper application, read
operating manual properly.
Alarm device of separator plant